Sleeve Bearings

Contact Now

Sleeve bearings can be made from bronze, steel or stainless steel. Brass bearings and plastic sleeve bearings are also manufactured for certain applications. A common type of sleeve bearing that works well in applications requiring constant lubrication is bronze sleeve bearings, which sometimes contain lubricant plugs (PTFE or graphite) to help with lubrication issues. Another sleeve material used for light to medium applications, called oil impregnated bronze sleeve bearings, contains pores that absorb oil, which is released under applied force and then reabsorbed back into the bearing once the force subsides.

Sleeve bearings offer several advantages, including lower cost, less maintenance, greatly reduce noise at low speeds and easier installation. Sleeve bearing performance is also marked by a higher load capacity, especially shock load resistance due to their greater contact zone. Sleeve bearings with a conformal liner compensate for misalignment issues and vibration damping, these one-piece design low-friction bearings reduce housing dimensions and weight by having a thin wall section.

ISOSTATIC EP-040812 Sleeve Bearings

Schaublin® Metric
.7480 in Precision

ISOSTATIC EP-040820 Sleeve Bearings

MW 12 º
0.5000 in

ISOSTATIC EP-050610 Sleeve Bearings

30.2mm 50700
50mm 90mm

ISOSTATIC EP-040816 Sleeve Bearings

2380 kN 520 mm
670 r/min 485.65 mm

ISOSTATIC EP-040714 Sleeve Bearings

129154 Adapter Mounted
Non-Expansion Bearin Two-Bolt Base

ISOSTATIC EP-040808 Sleeve Bearings

33.0000 in Not Rated
Non-Separable 117.47 mm

ISOSTATIC EP-040712 Sleeve Bearings

2.4375 in 4-1/64 in
Set Screw MUCTPL200W

ISOSTATIC EP-040710 Sleeve Bearings

Open Type 62mm
0.02 KGS 1.18inch

ISOSTATIC EP-040708 Sleeve Bearings

Standard 21.25mm
Open Type Steel

ISOSTATIC EP-040706 Sleeve Bearings

46800 lbs 65 mm
34000 lb 1.5000 in

ISOSTATIC EP-040620 Sleeve Bearings

0.02 KGS 1.156inch
Open Type 89449/89410-qbl

ISOSTATIC EP-070906 Sleeve Bearings

Precision 22.25 mm
18 ° Carbon Steel - corro